Has your home’s exterior lost its luster? A simple way to restore its former brilliance is to give it a bath. Power washing in Westlake, OH strips away the grime and lets your home shine. Follow these tips to make the process easy and get the best results possible from your pressure wash.

Choose the correct nozzle

Pressure washers are equipped with several different tips, to use for various projects and surfaces. These are typically color coded and vary from 0 degrees to 40 degrees. The smaller the angle, the more powerful the spray. So, you’ll want to be careful which you choose for your power wash. Using a spray that is too powerful for a sensitive surface can cause damage. When in doubt, start with a larger angle to ensure the protection of your property.

Choose the best solutions

Follow manufacturer guidelines for what solutions you should use with your machine. It’s also important to only use chemicals that will not harm your property. Central Window Cleaning uses a soft wash roof cleaning method, which is the only method recommended by the Asphalt Roofing Manufacturers Association. Using low pressure and specialized, environmentally friendly solutions, Central Window Cleaning ensures each roof is protected and shines like new.

For the rest of your exterior, you must also determine which method is best. A soft wash system gently cleans and cleanses your home. This method is best for stone, stucco and siding. Pressure washing in Westlake, OH is good for painted surfaces and concrete. If you’re not sure which method to use for your home, contact the pros at Central Window Cleaning for a professional consultation.

Choose the right distance

Pressure Wash - Westlake, OHAs you start your power washing project, start spraying a few feet away from the surface you are cleaning. Slowly approach, bringing the wand within three to four feet of the surface. Spray from side to side a few times and check to see if the surface is clean. If it is not, slowly move closer, to within one to two feet. This gradual process will ensure you don’t damage your home with a spray that is too powerful. You want to wash, not wreck.

Choose the right method

If you observe someone pressure washing in Westlake, OH, you may assume it’s a simple point-and-spray technique. While this is partly true, it does require some attention to detail to get the results you desire. As you spray, be careful of windows, flowers, vents and other fixtures. These can break under the stream of a power washer. Also, be aware of any small holes around windows or other places that could allow water to enter your home as you wash.

As you pressure wash, spray horizontally with smooth movements, left to right. Cover three to four feet with each motion. Start at the top and work your way down, to prevent streaking. If you apply a cleaning solution, pause for five to ten minutes to allow the cleaner to dissolve the grime. However, don’t let it sit so long that it dries. When rinsing, again start at the top and work your way down.

Choose the best professionals

To guarantee great results from power washing in Westlake, OH, contact the professionals at Central Window Cleaning. We apply years of experience and industry-leading techniques to each and every power washing project. Our commitment to excellence ensures your complete satisfaction. Get started today with a free estimate.

Header image Flickr zeevveezBy: zeevveez

Get started with a FREE QUOTE